Kelvin probe force microscopy (KPFM)
Hankintayksikkö: TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
- Julkaistu
- 13 syyskuuta 2026
- Ennakoitu arvo
- 177 100 €
- Toteutuspaikka
- FI1B1
- Menettely
- Avoin menettely
- Osat
- 1
- Ilmoituksen numero
- EF-56897
- Viite
- 9254dad3-1129-469d-83fc-aab1c11fe69e
- Virallinen lähde
- Virallinen lähde
CPV-koodit
- 38300000Mittalaitteet
Kuvaus
The object of the tender process was a Kelvin probe force microscopy (KPFM) equipped with atomic force microscopy (AFM) functionality, a state-of-the-art detector system, and equipment for advanced material surface potential mapping with an efficient spatial resolution and a minimum of topographical artifacts (later also “Equipment”). The equipment supports both AM- and FM-KPFM modes, operate with a potential range up to ±10 V, with a reasonable spatial resolution. The applied voltage is from a few hundred millivolts to a few volts (approximately 1-2 V) for AC and DC, and the device is equipped with advanced control electronics and software for quantitative analysis. An integrated cooling and heating control with a large temperature range (from possibly -30°C up to +90°C) in both air and liquid environments was required to enable in-situ studies under variable atmospheric conditions. The system provides stable scanning, possibly flexible imaging modes of tapping and/or non-contacting, and compatibility with applications across metals and energy materials. Because of this, the system allows large samples with complex topography. The technical specification of the equipment and t…
Hankintapäätökset
| Voittaja | Summa | Päivämäärä |
|---|---|---|
| Concept Scientific Instruments | 177 100 € | — |
Viralliset julkaisut
Muut hankintayksikön TEKNOLOGIAN TUTKIMUSKESKUS VTT OY hankinnat
- Tietoturva-asiantuntijapalvelut ja Attack Surface Management -palvelu
- Confocal Raman microscope for particle morphology and material identification
- Ultratyhjiössä toimiva ohutkalvodepositiojärjestelmä
- Kvanttinova-hankkeen kaupalliset neuvonanto- ja koordinointipalvelut
- Advanced oxide and metal etcher
- Plasma etch cluster tool
- Industrial-scale paper and board piloting services at Valmet’s Rautpohja pilot facility
- Carbonization and activation unit
- Plasma enhanced chemical vapour deposition tool
- Yritys-, omistaja- ja compliance-tietopalvelukokonaisuuden kokonaishankinta
Usein kysytyt kysymykset
- Mikä on tämän hankinnan ennakoitu arvo?
- Hankintayksikön julkaisema ennakoitu arvo on 177 100 €.
- Kuka on tämän hankinnan hankintayksikkö?
- Hankintayksikkö on TEKNOLOGIAN TUTKIMUSKESKUS VTT OY (Suomi).
- Miten voin osallistua julkisiin hankintoihin Suomessa?
- Tarjoukset jätetään Suomessa virallisen julkisten hankintojen portaalin kautta. El Vínculo auttaa löytämään hankinnat ja analysoimaan niiden asiakirjat; tarjous jätetään aina virallisessa lähteessä.
Luo ilmainen tili ja vastaanota joka päivä uudet liiketoimintaasi vastaavat julkiset hankinnat Suomessa.