Thin section lapping and polishing equipment and thin section/sample saw
Hankintayksikkö: Geologian tutkimuskeskus
- Julkaistu
- 10 lokakuuta 2025
- Tarjousten jättämisen määräaika
- 14 marraskuuta 2025, 12:00
- Toteutuspaikka
- FI1DB
- Menettely
- Avoin menettely
- Asiakirjat
- 1
- Ilmoituksen numero
- EF-31613
- Viite
- 7f13875f-b55a-4fd1-bbd6-2b916fb2461a
- Virallinen lähde
- Virallinen lähde
CPV-koodit
- 42641000Kiven, keramiikan, betonin tai lasin työstökoneet
Kuvaus
A bid is requested for one (1) thin section lapping and polishing equipment and/or for one (1) thin section/sample saw. Thin section lapping and polishing equipment: The thin section lapping and polishing equipment must be capable of producing polished thin sections, thin sections with surface glass, polished sections, and glued sections made from crushed material. GTK usually uses hot plate and oven impregnating with Araldite and Petropoxy adhesives for the production of thin sections. GTK uses a mineral and polarization microscope and a micrometer to inspect the quality and thickness of the grains. GTK produces thin sections from soft rock (shale) to very hard rock types (granite), as well as glued sections from crushed stone. As a general rule, the rock types in Finland are hard. The most produced sections at GTK are as follows: Polished thin section and section with surface glass, size 48 mm x 28 mm, other sizes are also possible Polished section, size varies, normally sample is round, and the size is 25 mm x 30 mm. Glued gravel section, size varies, normally sample is round, and the size is 25 mm x 30 mm. The thickness of the polished thin section must normall…
Osat (2)
| Osa | Kuvaus | CPV-koodi | Summa |
|---|---|---|---|
| 1 | Thin section lapping and polishing equipment | 42641000 Kiven, keramiikan, betonin tai lasin työstökoneet | — |
| 2 | Thin section/sample saw | 42641000 Kiven, keramiikan, betonin tai lasin työstökoneet | — |
Viralliset julkaisut
Muut hankintayksikön Geologian tutkimuskeskus hankinnat
- Maaperäkairaus ja havaintoputkien asennukset Oulun alueella (OUVETUR-hanke)
- Kairaukset Kiuruveden ja Pyhäsalmen alueella Stramin projektissa
- GTK Mintec Uusi Koetehdas Prosessilinja 1 EPS-toimituksen hankinta
- pXRF-mittalaite / pXRF-analyser
- Keskisyvän energiakaivon poraus Kokkolaan
- GTK Mintec Painesuodattimen (pieni) hankinta
- Thin section lapping and polishing equipment and thin section/sample saw (call for tenders no. 2)
- Borehole survey probes and wireline winch
- pXRF-mittalaite / pXRF-analyser
- Water Pilot Laboratory (MWTIP project)
Usein kysytyt kysymykset
- Mikä on tämän hankinnan tarjousten jättämisen määräaika?
- Tarjousten jättämisen määräaika on 14 marraskuuta 2025, 12:00. Tarkista virallinen lähde, sillä päivämäärät voivat muuttua.
- Kuka on tämän hankinnan hankintayksikkö?
- Hankintayksikkö on Geologian tutkimuskeskus (Suomi).
- Miten voin osallistua julkisiin hankintoihin Suomessa?
- Tarjoukset jätetään Suomessa virallisen julkisten hankintojen portaalin kautta. El Vínculo auttaa löytämään hankinnat ja analysoimaan niiden asiakirjat; tarjous jätetään aina virallisessa lähteessä.
Luo ilmainen tili ja vastaanota joka päivä uudet liiketoimintaasi vastaavat julkiset hankinnat Suomessa.