Medical consumables for cardiology
Buyer: PHI Clinical Hospital Tetovo
- Published
- 5 April 2024
- Submission deadline
- 2 May 2024, 12:00
- Place of performance
- MK006
- Procedure
- Open procedure
- Documents
- 1
- Notice number
- 00202064-2024
- Reference
- 6baad73b-ea53-4f56-8521-6876912305c3
- Official source
- Official source
CPV codes
- 33111710Material para angiografías
Description
Medical consumables for cardiology
Lots (45)
| Lot | Description | CPV code | Amount |
|---|---|---|---|
| 1 | STERILE ANGIOGRAPH SET for coronary procedures | 33111710 Material para angiografías | — |
| 2 | Set kit for transradial access which is a set sterile for one use and consists of the described parts: Arterial introducer with dilator, miniwire and puncture needle, for transradial access, with a length of minimum 7 cm to maximum 25 cm and a diameter of 5F to 6F, full length RO with hemostatic valve and side tube, plastic wire 45 - 80cm, cannula 20G 5.1cm, syringe 2.5ml | 33111710 Material para angiografías | — |
| 3 | GUIDE WIRES (min 0.035") (180 cm-260 cm - minimum length span) | 33111710 Material para angiografías | — |
| 4 | Wire guides 0.035" to 0.038" super stiff with a floppy (soft) tip. With a range of lengths from 180 to 300 cm | 33111710 Material para angiografías | — |
| 5 | Hydrophilic nitinol guidewires coated with RO polyurethane with tungsten and hydrophilic coating 0.018” - 0.038”, 50cm to 260cm. Available tip shape: Straight, J, Angled and Double Angled Bolia" | 33111710 Material para angiografías | — |
| 6 | Tapered Tip Hydrophilic Nitinol Guide Wires Coated with RO Polyurethane with Visibility Tungsten and Hydrophilic Coating Full Length 0.020" - 0.038", 80cm - 300cm Available in Tip Shapes Straight, 45° angled, 1.5 mm J shape | 33111710 Material para angiografías | — |
| 7 | Diagnostic catheters, left and right for transfemoral / transradial access, 5F and 6F; "double-braided", soft, atraumatic tip, coated with lubricant along the entire length of 100, 110cm , 125cm available at a minimum of the following curves: Judkins Left 3.5 , 4.0 , 4.5 , 5.0 , 6.0 Amplatz Left 1.0 , 2.0 , 3.0 , Amplatz Right 1.0 ,2.0: MPA , MPB , NOTO , 3DRC , RCB , LCB , IMA , Pig Tail or equiv | 33111710 Material para angiografías | — |
| 8 | Diagnostic Angiography Catheters: Coronary, Left, Right, MP, SIM, PIG TAIL or equivalent, 4 F, "doublebraided" with atraumatic soft tip and length 100 cm, inner diameter 1.05 mm, compatible with 0.038" guide wires | 33111710 Material para angiografías | — |
| 9 | Diagnostic angiographic catheter double braided SIM 2.3 Inner diameter 0.047” for 5F. Diameters from 4F to 6F, lengths from 100 to 125cm. | 33111710 Material para angiografías | — |
| 10 | Guiding coronary catheters for transfemoral/transradial access size 5-8F with various configurations including EBU ( Extra backup ), RBU, 3D, NOTO, LCB, RCB , CHAMP internal diameter for catheter size 6F to be minimum 0.070, length 55cm , 80cm, 90cm, 100cm, 110cm, for kissing balloon technique in bifurcation lesions | 33111710 Material para angiografías | — |
| 11 | Coronary stent with sinusoidal configuration and permanent polymer coated cytostatic of the LIMUS family (DES ), the stent has a platinum iridium core for enhanced visualization with an outer coat of cobalt chrome, platinum iridium markers, a minimum span of stent diameter 2.25mm - 4.0mm and minimum length range 8mm-38mm | 33111710 Material para angiografías | — |
| 12 | LIMUS Family Cytostatic (DES) Permanent Polymer-Coated Coronary Stent for Sinusoidal Configuration,Stent Features Platinum Iridium Core for Enhanced Visualization with Cobalt Chromium Outer Cover, Platinum Iridium Markers, Minimum Span Stent Diameter 2.0 -5.00mm with the possibility of over expansion up to 6.00mm (for diameters 4.5-5.0mm) and a minimum span of length 8mm-38mm | 33111710 Material para angiografías | — |
| 13 | Coronary PLATINUM-CHROMIUM stent with bioabsorptive polymer coated with cytostatic with antiinflammatory and antiproliferative effect from the LIMUS family - (DES) minimum diameter range of 2.25-4.0mm and minimum length range: 8mm -38mm | 33111710 Material para angiografías | — |
| 14 | Cobalt Chromium Alloy coronary stent, non-linear multi-link cell design, coated with permanent polymer and cytostatic everolimus (DES), minimum span 2 to 4mm diameter and 8 to 48mm length compatible with 5F guiding catheter for all sizes | 33111710 Material para angiografías | — |
| 15 | Coronary DES COBALT CHROMIUM STENT for complex and bifurcation lesions coated with bioresorbable polymer with cytostatic from "LIMUS" family selectively placed on abluminal surface 3.9 μg/mm "Open cell" design with diameter 2.25 - 4mm, lengths 9 - 38mm compatible with 5F for all sizes | 33111710 Material para angiografías | — |
| 16 | Coronary balloon dilatation catheters, semicompliant, low profile 0.41mm or 0.016" tip for all diameters, traversing stenoses, hydrophilic coating, compatible with 5F guiding catheter, platinum-iridium markers, RX compatible with 0.014" wire. Minimal diameter range from 1.5mm to 4mm (every 0.25mm for diameter range from 2 - 4mm); minimum balloon length range from 6mm to 30mm; all diameters to be a | 33111710 Material para angiografías | — |
| 17 | SEMICOMPLIANT balloon catheters, available in Rx and OTW technique, hydrophilic coated, with two markers on the balloon and two depth markers on the shaft, with a minimum length range of 10mm - 40mm and a minimum diameter range of 1.25mm - 4.0mm, compatible with 5F guiding catheter. shaft length 145cm, diameter 2F proximally, of 2.4F distally. | 33111710 Material para angiografías | — |
| 18 | Balloon catheters for CORONARY dilatation for focal and long lesions, Semi-compliant, with two markers, PEBAX or equivalent material, balloon length from 6-30mm, from 1.20 - 5.0mm diameter range, tip profile maximum 0.017” for all diameters, compatible with 5F (kissing balloon compatible with 6F) Crossing profile 0.021" (3.0mm x 20 mm balloon) or equivalent | 33111710 Material para angiografías | — |
| 19 | Low profile NON COMPLIANT balloon catheters, for focal and long lesions, for in-stent dilatation and postdilatation, with two markers, minimum length range - 6mm - 27 mm, and minimum diameter range - 2.0mm 5.0mm (with intermediate dimensions of 0.25mm in diameter); tip profile maximum 0.015". | 33111710 Material para angiografías | — |
| 20 | STO balloon catheters, hydrophilic coated, with two markers on the balloon and two depth markers on the shaft, diameter 1.00mm - 4.00mm, length 5mm - 40mm compatible with 4F guiding catheter. shaft length 145cm, diameter 1.9F proximally. | 33111710 Material para angiografías | — |
| 21 | Wire guide for PKI, with a design for penetrating technique in chronic total occlusions 'tapperd tip'0.014”/0/009”(0.23mm/0.36mm), with a maximum length of 190 cm, Durasteel –stainless steel, hydrophilic coating, cover type- Intermediate polymer sleeve with exposed tip coils, tip style Core-To-tip, tip load 4.8-13gr | 33111710 Material para angiografías | — |
| 22 | CORONARY MICROCATHETER hydrophilic coated with maximum length up to 150 cm, compatible with (0.014”) guide wire, distal outer diameter 1.8 Fr (0.60 mm), proximal outer diameter 2.6 Fr (0.87 mm) With conical "tapered" lumen lined with PTFE. | 33111710 Material para angiografías | — |
| 23 | Balloon pump set - pump with ergonomic pistol grip, Y connectors, injection needle, torquer and working pressure up to 30 atm | 33111710 Material para angiografías | — |
| 24 | Self-expanding carotid NITINOL stent with a flexible two-layer micromesh closed cell design, for protection against embolization, and the possibility of repositioning during expansion up to 50%. Compatible with 5F introducer sheath Rx system, (diameter 5-12mm, stent length 16 to 100mm) | 33111710 Material para angiografías | — |
| 25 | PTA balloon catheter with dual guidewire exchange capability, quick and full length, low profile up to 1.02mm tip profile, compatible with 0.035" wire, 3mm to 12mm diameter and 20mm to 200mm length RO markers on the balloon and on the catheter, compatible with a 6Fr introducer | 33111710 Material para angiografías | — |
| 26 | Hybrid hydrophilic guidewires with extra-stiff body of Nitinol with PTFE spiral for passage through complex lesions and atraumatic hydrophilic distal part of 25cm, coated with RO polyurethane with tungsten for visibility, diameter 0.014 , 0.018 , 0.035 length 180cm, 260cm, 300 cm. Available in straight and angled tip shape | 33111710 Material para angiografías | — |
| 27 | Hydrophilic guiding introducers with stainless steel, spiral with greater support and PTFE inner layer, 5F-8F, 45cm-90cm length range, hydrophilic part 5-35cm | 33111710 Material para angiografías | — |
| 28 | Hybrid PKI Guidewires, 0.014", 180 cm length, PTFE-coated stainless steel proximal, Nitinol distal and hydrophilic coated, straight shaping tip with platinum helix for better visibility, varying tip loading from 0.6 gf to 3.6 gf. | 33111710 Material para angiografías | — |
| 29 | Guide wire for PKI (0.014"), length range from min 190cm to max 300cm, with different degree of support for stenting and different degree of tip strength, hydrophilic or hydrophobic coating with Nitinol elastinite core, tip shape Straight or J- type, cover type BARE COILS, tip style- shaping ribbon, tip load 0.7 gr or equivalent | 33111710 Material para angiografías | — |
| 30 | Hydrophilic guide wire Durasteel–stainless steel, hydrophilicity in length 20-30cm with polymer sleeve, for highly tortuous coronary arteries, with dimension 0.014", from 190 cm to 300 cm length range with varying degree of tip support. Tip-tip Style- Core-To-tip , tip load 08-1.2 gr or equivalent | 33111710 Material para angiografías | — |
Award criteria
- Price
Official publications
- TED · 00202064-2024 · 5 April 2024
- OJS · 68/2024 · 5 April 2024
Other tenders from PHI Clinical Hospital Tetovo
- Food for patients and on-duty staff (ready meals) - repeated procedure
- Food for patients and on-duty staff (ready meals)
- Electricity
- Consumables for interventional cardiology
- Reagents and consumables for the integrated automated analyzer Atellica or equivalent
- Medicines from the positive list
- Tests, reagents and consumables for Advia Centaur or equivalent,,
- Spare parts for servicing the GE Light Speed VCT computed tomography or equivalent
- Extra light fuel oil-1 (EL-1) - Repeated procedure
- Extra light household oil -1 (EL-1)
Frequently asked questions
- What is the deadline to bid for this tender?
- The submission deadline is 2 May 2024, 12:00. Check the official source, as dates can be modified.
- Who is the buyer of this tender?
- The contracting authority is PHI Clinical Hospital Tetovo (European Union).
- How can I bid for public tenders in European Union?
- Bids are submitted through the official procurement portal of European Union. El Vínculo helps you find tenders and analyse their documents; submission always happens at the official source.
Get alerts for tenders like this
Create a free account and receive new tenders from European Union matching your business, every day.
Create a free account and receive new tenders from European Union matching your business, every day.