RFQ: High-Range Optical Dew Point Hygrometer

Description

NPLs requirement is for a high-range hygrometer with the ability to measure up to +95 °C dew-point temperature with an accuracy of ≤ ±0.1 °C. The purpose is to give confidence to the humidity generated by NPL's primary standard generators. Allowing us to perform maintenance activities and ensuring our ability to deliver our stated international CMCs (Calibration & Measurement Capabilities), as well as enabling its use as a reference standard hygrometer for comparison calibrations. The setup needs to allow for two separate scenarios. In the first circumstance, the test gas will be supplied to the hygrometer inlet from an NPL primary standard generator at 105 kPa and be vented to atmospheric through a rotameter with a needle valve assembly for flow control. In the second circumstance, the hygrometer must have an internal pump that samples gas from a temperature and humidity chamber. Additional information: The Authority is using the LUPC Bravo e-Procurement portal to conduct the procurement process. All Suppliers must register their company via the LUPC Bravo Portal.

Official publications

• ITT: Procurement of Alkaline Electrolyser Test Station
  Published: 19 August 2024
• ITT: Procurement of Alkaline Electrolyser Test Station
  Published: 19 August 2024
• RFQ: GC-PDHID for Trace Amount of Inert Gases Analysis
  Published: 6 August 2024
• ITT: Procurement of Dilution Refrigerator for Measurements of Superconducting Qubits
  Published: 5 August 2024
• RFQ: OWTF Very Low Frequency (VLF) Source Transducer
  Published: 1 August 2024
• RFQ: RF Spectrum Analyser
  Published: 31 July 2024
• ITT - Security Operations Centre (SOC)
  Published: 3 April 2024
• ITT - Big Glove Box with Safety Disk
  Published: 8 February 2024
• RFQ - Prototype Novel Dosimeter for FLASH Radiotherapy
  Published: 29 January 2024
• ITT - Optical Parametric Oscillator
  Published: 4 December 2023

Previous and next from National Physical Laboratory

• ITT - Variable Field NMR Spectrometer — 14 November 2023
• ITT - Multi-Species Laboratory ATD/GC/MS Systems — 13 November 2023

Similar open tenders

• Multi-Column Continuous Chromatography System and Automated Viral Inactivation System — deadline 17 November 2026
• PRJ_31300 - WCC Heat Network Software — deadline 17 November 2026
• Supply of Colorimetric Analysers to the Environment Agency — deadline 11 November 2026
• Multi-Column Continuous Chromatography System and Automated Viral Inactivation System — deadline 17 November 2026
• Dynamic Purchasing System for the Provision of Mobile Preliminary Roads Drug Testing Devices (MPRDTD) — deadline 30 May 2027
• Operations, Site Work and Facilities Management Dynamic Purchasing System — deadline 8 January 2029

Frequently asked questions

What is the deadline to bid for this tender?

The submission deadline is 5 August 2024, 17:00. Check the official source, as dates can be modified.

Who is the buyer of this tender?

The contracting authority is National Physical Laboratory (United Kingdom).

How can I bid for public tenders in the United Kingdom?

Bids are submitted through the official public procurement portal in the United Kingdom. El Vínculo helps you find tenders and analyse their documents; submission always happens at the official source.

How can I find out about similar tenders when they are published?

Create an account at el-vinculo.com and we give you a free month and set up your company's filters — contract type, CPV codes, value and territory — so you are the first to know when new tenders like this one come out in the United Kingdom. We email you as soon as one matching your profile is published, with the whole deadline ahead to prepare the bid.

No credit card · Sign up in 2 minutes.

Public tenders by region

• Public tenders in London