Delivery and installation of a High ion density etcher for lithium niobate on insulator - LiNb03 (LN)
Ordregiver: Danmarks Tekniske Universitet - DTU
- Offentliggjort
- 11 september 2026
- Tilbudsfrist
- 15 oktober 2026, 23:55
- Udførelsessted
- Kgs. Lyngby, DK013
- Procedure
- Offentligt udbud
- Delkontrakter
- 1
- Dokumenter
- 1
- Bekendtgørelsesnummer
- 00628101-2026-01
- Reference
- 3f758954-4e93-40e3-954b-d4f8b1299542
- Officiel kilde
- Officiel kilde
CPV-koder
- 42000000Industrimaskiner
- 38636110Lasere til industriel brug
- 38810000Industrielle processtyringsanlæg
Beskrivelse
DTU Nanolab wishes to acquire a high ion density source reactive ion etcher for etching lithium niobate on insulator 150 mm wafer processing. Delivery is expected no later than Q4 2027. We are looking for a highly versatile instrument providing stable etch recipes, capable of etching at both nanometer scale and micrometer scale with precise control of etching depth, typically a few hundreds of nm. The instrument must have state-of-the-art performance in terms of profile control, uniformity, selectivity, and in particu-lar etching sidewall smoothness to achieve low waveguide loss. The Instrument will be installed in the DTU Nanolab cleanroom - a university facility providing a comprehensive suite of micro- and nanofabrication tools. It serves a diverse community of over 200 active users, ranging from novice students to experienced researchers, as well a high percentage of commercial clients. At DTU Nanolab there are several research groups and companies working on developing and running small scale production of optical devises on the tools. Therefor the capability of etching smooth optical waveguide, gratings and other low-roughness optical devises are of high importance to us.
Tildelingskriterier
- Kvalitet · 80% — Based on the tenderers answers to Appendix 1
- Pris · 20% — Based on the offered prices
Officielle publikationer
Andre udbud fra Danmarks Tekniske Universitet - DTU
- Mægleraftale for salg af forskningsskibet DANA IV
- Robot-compatible automatic film applicator
- Purchase of two (2) micro gas chromatograph (micro GC)
- Udbud af kontorpavilloner DTU Risø og DTU Lyngby
- Intelligent styresystem til global mobility compliance
- Opdrætsforhold til østersøtorsk til naturengenopretningsprojekt Sejerø Seascape
- Triple quadrupole liquid chromatography-mass spectrometry (LC-MS/MS)
- Udførelse af sporgasmålinger (total metanemission) samt landbrugsfaglig rådgivning
- Purchase of Eddy Covariance System for continuous measurements of CO₂, H₂O and CH₄ fluxes
- Benchtop flow cytometry cell analyzer for immunology, allergy, and cell-based assay research
Ofte stillede spørgsmål
- Hvad er fristen for at byde på dette udbud?
- Tilbudsfristen er 15 oktober 2026, 23:55. Tjek den officielle kilde, da datoer kan blive ændret.
- Hvem er ordregiver for dette udbud?
- Ordregiveren er Danmarks Tekniske Universitet - DTU (Danmark).
- Hvordan kan jeg byde på offentlige udbud i Danmark?
- Tilbud afgives via den officielle udbudsportal i Danmark. El Vínculo hjælper dig med at finde udbud og analysere dokumenterne; afgivelsen sker altid hos den officielle kilde.
Opret en gratis konto, og modtag hver dag nye udbud i Danmark, der matcher din virksomhed.