Gaseous Hydrogen Pressure Reduction Station
Buyer: Health and Safety Executive
- Published
- 12 February 2026
- Submission deadline
- 13 March 2026
- Estimated value
- £35,000
- Place of performance
- UK
- Procedure
- Open procedure
- Lots
- 1
- Documents
- 1
- Notice number
- 012868-2026
- Reference
- ocds-h6vhtk-064efc
- Official source
- Official source
CPV codes
- 38800000Industrial process control equipment and remote-control equipment
Description
HSE require a gaseous hydrogen pressure reduction station for use during a research test programme. The PRS will be connected to a bulk hydrogen supply up to 500 barg. The PRS should be able to control a flow of gaseous hydrogen at a set flow rate within the range 20 - 400 g/s. The system should respond to a setpoint which is determined from an analogue signal sent to the pressure regulator. If a dome regulator is used, HSE will provide and install a nitrogen supply to the regulator. The PRS will be connected to a vent stack and pressure relief system, which will be provided and installed by HSE before the system is used for experiments. The PRS should be instrumented with pressure and temperature upstream and downstream of the regulation, and a mass flow meter. These sensors should have analogue outputs (ideally 4-20 mA signals) suitable for connection to a separate data logging system. Please give details of the accuracy and calibration of instrumentation. Instrumentation should be ATEX rated and suitable for hydrogen. Inlet: Hydrogen @ up to 500 barg, -10 to 25 °C Outlet: Hydrogen @ up to 100 barg, up to 400 g/s Pipework: 1" ID stainless 316L steel, 1 connection suitable f…
Official publications
- FTS · 012868-2026 · 12 February 2026
Other tenders from Health and Safety Executive
- Transmission Electron Microscope (TEM) with Energy Dispersive X-Ray Spectroscopy (EDS) for asbestos analysis
- THE PROVISION OF A TECHNICAL ADVISOR TO HSE
- The Provision of a Managed Call Conferencing Service
- Automatic Machine for Metallographic Sample Preparation
- The Provision of Secure Disposal of End of Life (EOL) IT Kit
- The Provision of Guidance for the Safe Deployment and Use of Collaborative Robots in Industry
- FOR COMPUTATIONAL FLUID DYNAMICS (CFD) AND FINITE ELEMENT (FE) SOFTWARE, INCLUDING PRODUCT MAINTENANCE AND SUPPORT.
- The Provision of Media and Marketing for HSE
- The Provision of an External Lawyer to Draft a Statutory Instrument
- The Provision of External Support for the Discovering Safety Programme
Frequently asked questions
- What is the deadline to bid for this tender?
- The submission deadline is 13 March 2026. Check the official source, as dates can be modified.
- What is the estimated value of this tender?
- The estimated value published by the buyer is £35,000.
- Who is the buyer of this tender?
- The contracting authority is Health and Safety Executive (United Kingdom).
- How can I bid for public tenders in the United Kingdom?
- Bids are submitted through the official public procurement portal in the United Kingdom. El Vínculo helps you find tenders and analyse their documents; submission always happens at the official source.
Create a free account and receive new public tenders published in the United Kingdom that match your business, every day.